BTHFS - 37 539G1T MILP24441/1 R150

  • MSDS: BTHFS
  • Manufacturer: VALSPAR CORP
  • Product Name: 37 539G1T MILP24441/1 R150
  • National Stock Number: 8010-00N045888
Product Identification

Product ID:37 539G1T MILP24441/1 R150
MSDS Date:12/14/1992
FSC:8010
NIIN:00N045888
MSDS Number: BTHFS

Responsible Party
VALSPAR CORP
1101 THIRD ST SOUTH
MINNEAPOLIS, MN 55415
US

Emergency Phone: 612-332-7371

Info Phone: 612-332-7371

Cage: 13374

Contractor
VALSPAR CORP
MINNEAPOLIS, MN 55415 US

Telephone: 612-332-7371

Cage: 91346

Ingredients

AMORPHOUS SILICA; (SILICON DIOXIDE (AMORPHOUS)

CAS: 67762-90-7

Fraction By Weight: 1%

OSHA PEL 20 MPPCF(MFR)


SILICA (TYPE NOT SPECIFIED)

Fraction By Weight: 15%

OSHA PEL 20 MPPCF(MFR)


TALC (POWDER), CONTAINING NO ASBESTO FIBER; (TALC)

CAS: 14807-96-6

RTECS: MW2700000

Fraction By Weight: 10%

OSHA PEL 20 MPPCF(MFR)

ACGIH TLV: 2 MG/M3


EPOXY RESIN; (1-METYYLETHYLIDENE)BIS-POLYMER WITH

Fraction By Weight: 50%

OSHA PEL N/K(MFR)

ACGIH TLV: N/K(MFR)


SOLVENT NAPHTHA(PETROLEUM), LIGHT AROMATIC; (AROMATIC

CAS: 64742-95-6

RTECS: WF3400000

Fraction By Weight: 25%

OSHA PEL N/K(MFR)

ACGIH TLV: 100 PPM(MFR)

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:RESPIRATORY IRRITATION, DIZZINESS,
NAUSEA, LOSS OF CONSCIOUSNESS. POSSIBLE SENSITIZATION. NOTICE:
REPORTS HAVE ASSOCIATED REPEATED AND PROLONGED OCCUPATIONAL
OVEREXPOSURE TO SOLVENTS WITH PERMANENT BR AIN & NERVOUS SYSTEM
DAMAGE. INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING & INHALING
CONTENTS MAY BE HARMFUL/FATAL.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:ANY RESPIRATORY OR SKIN CONDITION.

First Aid

First Aid:INHAL: REMOVE PERSON FROM EXPOSURE AREA. IF BREATHING HAS
STOPPED, USE ARTIFICIAL RESPIRATION & GET MED ATTN. EYES: FLUSH
WITH WATER FOR AT LEAST 15 MINUTES. SKIN: WASH WITH SOAP & WATER.
INGEST: CALL MD IMMEDIATELY.

Fire Fighting

Flash Point:115F,46C
Lower Limits:0.7%
Upper Limits:6.00%
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM, AND/OR WATER
FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL PROT
EQUIP . CONTAINERS EXPOSED TO FIRE SHOULD BE KEPT COOL WITH WATER
SPRAY.
Unusual Fire/Explosion Hazard:NONE.

Accidental Release

Spill Release Procedures:VENT AREA. AVOID BREATHING OF VAPORS. USE
NIOSH/MSHA APPROVED SCBA FOR LARGE SPILLS IN CONFINED AREA. WIPE UP
OR ABSORB ON SUITABLE MATERIAL AND SHOVEL UP. AVOID ALL PERSONAL
CONTACT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARKS & OPEN
FLAMES. KEEP CNTNR CLOSED WHEN NOT IN USE. DO NOT STORE ABOVE 120F.
ALL LABEL WARNINGS MUST BE OBSERVED(SUPP DATA)
Other Precautions:BASED ON PRODUCT FLASH PT & VAPOR PRESS SUITABLE
STORAGE SHOULD BE PROVIDED IN ACCORDANCE WITH OSHA REGULATIONS
1910.106. EMPTY CNTNRS MAY CONTAIN PRODUCT RESIDUE, INCLUDING
FLAMMABLE/EXPLOS VAPS. DO NOT CUT, PUNCTURE/WELD ON/NEAR CNTNR.

Exposure Controls

Respiratory Protection:WEAR NIOSH/MSHA APPROVED PROPERLY FITTED
RESPIRATOR DURING AND AFTER APPLICATION UNLESS AIR MONITORING
VAPOR/MIST LEVELS ARE BELOW APPLICABLE LIMITS. FOLLOW RESPIRATOR
MANUFACTURERS DIRECTIONS FOR RES PIRATOR USE.
Ventilation:REQUIRED FOR SPRAYING OR IN A CONFINED AREA. VENTILATION
EQUIPMENT SHOULD BE EXPLOSION PROOF.
Protective Gloves:NEOPRENE OR OTHER NONPOROUS GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES
Other Protective Equipment:NEOPRENE OR PLASTIC APRON AND PROTECTIVE
CLOTHING COVERING EXPOSED SKIN AREAS.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
HNDLG/STOR: UNTIL THE CONTAINER HAS BEEN CLEANED OR RECONDITIONED.

Chemical Properties

HCC:F4
Boiling Pt:B.P. Text:315F,157C
Vapor Pres:3.0 @ 68F
Vapor Density:4 (AIR=1)
Spec Gravity:1.21
Evaporation Rate & Reference:0.16 (BUTYL ACETATE=1)
Solubility in Water:NO
Appearance and Odor:NORMAL FOR A COATINGS PRODUCT.
Percent Volatiles by Volume:36.2

Stability

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:SILICON DIOXIDE, CARBON
DIOXIDE/MONOXIDE, METAL OXIDES.

Disposal

Waste Disposal Methods:DISPOSE IN CHEMICAL DISPOSAL AREA OR IN A MANNER
THAT COMPLIES WITH LOCAL, STATE & FEDERAL REGULATIONS. DO NOT
INCINERATE CLOSED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.